For this 435,000 square foot high rise,
ROI acted as the Mechanical System Architect for the Owner, working with a production
engineering firm that had already been retained by the Architect.
A
combination of Thermal Energy Storage and Low Temperature Air delivery were utilized to
reduce the height of the facility by 23'. The
construction savings made possible by the height reduction were great enough to completely
pay for the TES and chiller plant systems, and the TES system and Low Temperature Air
systems combine to reduce the operating cost of the facility by approximately $0.60 per
square foot. TES installation incentives of
slightly over $500,000 obtained by ROI from
the local utility made the system even more cost effective.
DDC zone
controls are used to provide information to allow the complete reset of the static
pressures and supply air temperatures, based on the actual loads in the zones.
The air
distribution system in this facility operates for most of the year at 0.35 w.c. to
0.45" w.c. discharge static pressure, and 55° F to 60° F supply air temperatures. On peak load days, the
supply air temperature is dropped, and the static pressure is increased to respond to the
demands of the tenant spaces. |